|
|
The Intelix
DVI-F allows a high-quality DVI (digital visual interface) signal
to be transmitted up to 150 feet over two Cat 5 cables
(one shielded, one unshielded). The DVI-F is HDCP compliant,
supports standard HDTV and VESA resolutions, and supports the
DDWG standard for DVI compliant monitors. The
DVI-F wq
as
discontinued on July 15, 2008. It was replaced by the DIGI-DVIT2R-F.
|
Example System |
Example
System 1: A laptop computer is connected to a remote
plasma via Intelix send and receive DVI-F baluns and two
runs of Cat 5 cabling. Note that the DDC feed is via unshielded
Cat 5 and the video feed is via shielded Cat 5. The DVI-F
balun system is powered on the send end. Each Intelix
DVI-F contains a send balun, a receive balun, a power
supply, and a six foot DVI cable. 
|
|
Example System |
Example
System 2: A laptop computer is connected to a projector
via Intelix send and receive DVI-F baluns and two runs
of Cat 5 cabling. Note that the DDC feed is via unshielded
Cat 5 and the video feed is via shielded Cat 5. The DVI-F
balun system is powered on the send end. Each Intelix
DVI-F contains a send balun, a receive balun, a power
supply, and a six foot DVI cable.
|
|
|
Technical Specifications |
| Max
Distance |
150 feet |
|
Video Amplifier
Bandwidth |
1.65 GHz |
| Power |
External 5 VDC on the
source device |
| Single
Link Range |
1080P/1920 x 1200 |
| Input
Video Signal |
1.2 volts p-p |
| Input
DDC Signal |
5 volts p-p (TTL) |
| Input
Connectors |
(1) Molex 24 pin female DVI-I
connector and (2) RJ45 connectors |
 |
| Output
Connectors |
(1) Molex 24 pin female DVI-I
connector and (2) RJ45 connectors |
|
| Cable |
Shielded twisted
pair cable and connectors required for the video signal;
unshielded twisted pair cable on the DDC signal
Cat 3, Cat 5, Cat 5e, Cat 6, and Cat
7 compatible
|
| Max
Power Consumption |
15 watts |
|
Enclosure |
RF shielded metal |
|
Dimensions |
3.4" x 3.25" x 1.25" |
|
Shipping Weight |
3 lbs. |
|
Temperature |
Operating: 32 to
131 degrees F
Storage: -4 to 185
degrees F
Humidity: up to
95%
|
|
Warranty |
2 years |
| Part # |
DVI-F
|
|
Included Accessories |
Send and receive baluns, one 5V power supply, one 6'
DVI cable |
|
When
shouldn't I use baluns? |
|
|
|
|
The Intelix DVI-F is HDCP
compatible; however, you must verify your source and
destination devices support (or don't support) HDCP
encryption.
Essentially, HDCP compliant devices
will only transmit to or receive from other devices with HDCP
coding. The Intelix DVI balun will also work if neither device is
HDCP compatible. |
|
|
|
The Intelix DVI-F features
a dual link DVI-I connector; however, it accepts DVI-D
signals.
|
|
|
|
Compliancy |
|
This product is lead-free
|
|
|
|
